Launching an application | Tarantool

Launching an application

Using Tarantool as an application server, you can write your own applications. Tarantool’s native language for writing applications is Lua, so a typical application would be a file that contains your Lua script. But you can also write applications in C or C++.

Note

If you’re new to Lua, we recommend going over the interactive Tarantool tutorial before proceeding with this chapter. To launch the tutorial, say tutorial() in Tarantool console:

tarantool> tutorial()
---
- |
 Tutorial -- Screen #1 -- Hello, Moon
 ====================================

 Welcome to the Tarantool tutorial.
 It will introduce you to Tarantool’s Lua application server
 and database server, which is what’s running what you’re seeing.
 This is INTERACTIVE -- you’re expected to enter requests
 based on the suggestions or examples in the screen’s text.
 <...>

Let’s create and launch our first Lua application for Tarantool. Here’s a simplest Lua application, the good old “Hello, world!”:

#!/usr/bin/env tarantool
print('Hello, world!')

We save it in a file. Let it be myapp.lua in the current directory.

Now let’s discuss how we can launch our application with Tarantool.

If we run Tarantool in a Docker container, the following command will start Tarantool without any application:

$ # create a temporary container and run it in interactive mode
$ docker run --rm -t -i tarantool/tarantool:latest

To run Tarantool with our application, we can say:

$ # create a temporary container and
$ # launch Tarantool with our application
$ docker run --rm -t -i \
             -v `pwd`/myapp.lua:/opt/tarantool/myapp.lua \
             -v /data/dir/on/host:/var/lib/tarantool \
             tarantool/tarantool:latest tarantool /opt/tarantool/myapp.lua

Here two resources on the host get mounted in the container:

  • our application file (myapp.lua) and
  • Tarantool data directory (/data/dir/on/host).

By convention, the directory for Tarantool application code inside a container is /opt/tarantool, and the directory for data is /var/lib/tarantool.

If we run Tarantool from a package or from a source build, we can launch our application:

  • in the script mode,
  • as a server application, or
  • as a daemon service.

The simplest way is to pass the filename to Tarantool at start:

$ tarantool myapp.lua
Hello, world!
$

Tarantool starts, executes our script in the script mode and exits.

Now let’s turn this script into a server application. We use box.cfg from Tarantool’s built-in Lua module to:

  • launch the database (a database has a persistent on-disk state, which needs to be restored after we start an application) and
  • configure Tarantool as a server that accepts requests over a TCP port.

We also add some simple database logic, using space.create() and create_index() to create a space with a primary index. We use the function box.once() to make sure that our logic will be executed only once when the database is initialized for the first time, so we don’t try to create an existing space or index on each invocation of the script:

#!/usr/bin/env tarantool
-- Configure database
box.cfg {
   listen = 3301
}
box.once("bootstrap", function()
   box.schema.space.create('tweedledum')
   box.space.tweedledum:create_index('primary',
       { type = 'TREE', parts = {1, 'unsigned'}})
end)

Now we launch our application in the same manner as before:

$ tarantool myapp.lua
Hello, world!
2017-08-11 16:07:14.250 [41436] main/101/myapp.lua C> version 2.1.0-429-g4e5231702
2017-08-11 16:07:14.250 [41436] main/101/myapp.lua C> log level 5
2017-08-11 16:07:14.251 [41436] main/101/myapp.lua I> mapping 1073741824 bytes for tuple arena...
2017-08-11 16:07:14.255 [41436] main/101/myapp.lua I> recovery start
2017-08-11 16:07:14.255 [41436] main/101/myapp.lua I> recovering from `./00000000000000000000.snap'
2017-08-11 16:07:14.271 [41436] main/101/myapp.lua I> recover from `./00000000000000000000.xlog'
2017-08-11 16:07:14.271 [41436] main/101/myapp.lua I> done `./00000000000000000000.xlog'
2017-08-11 16:07:14.272 [41436] main/102/hot_standby I> recover from `./00000000000000000000.xlog'
2017-08-11 16:07:14.274 [41436] iproto/102/iproto I> binary: started
2017-08-11 16:07:14.275 [41436] iproto/102/iproto I> binary: bound to [::]:3301
2017-08-11 16:07:14.275 [41436] main/101/myapp.lua I> done `./00000000000000000000.xlog'
2017-08-11 16:07:14.278 [41436] main/101/myapp.lua I> ready to accept requests

This time, Tarantool executes our script and keeps working as a server, accepting TCP requests on port 3301. We can see Tarantool in the current session’s process list:

$ ps | grep "tarantool"
  PID TTY           TIME CMD
41608 ttys001       0:00.47 tarantool myapp.lua <running>

But the Tarantool instance will stop if we close the current terminal window. To detach Tarantool and our application from the terminal window, we can launch it in the daemon mode. To do so, we add some parameters to box.cfg{}:

  • background = true that actually tells Tarantool to work as a daemon service,
  • log = 'dir-name' that tells the Tarantool daemon where to store its log file (other log settings are available in Tarantool log module), and
  • pid_file = 'file-name' that tells the Tarantool daemon where to store its pid file.

For example:

box.cfg {
   listen = 3301,
   background = true,
   log = '1.log',
   pid_file = '1.pid'
}

We launch our application in the same manner as before:

$ tarantool myapp.lua
Hello, world!
$

Tarantool executes our script, gets detached from the current shell session (you won’t see it with ps | grep "tarantool") and continues working in the background as a daemon attached to the global session (with SID = 0):

$ ps -ef | grep "tarantool"
  PID SID     TIME  CMD
42178   0  0:00.72 tarantool myapp.lua <running>

Now that we have discussed how to create and launch a Lua application for Tarantool, let’s dive deeper into programming practices.

Found what you were looking for?
Feedback